I got two GoPro Hero3 Black cameras and am planning a panoramic project with them. However, to do the project correctly and accurately, I need a good read on their field-of-view. So, I set up a tripod and a grid and a tape measure, and took a few photos. Here they are, desaturated and contrast-enhanced, with central red dots and some annotations. First, measuring the diagonal FOV: Next, the horizontal FOV: Finally, the vertical FOV: The front of the camera lens was almost exactly 17 inches from the grid. The camera body started about 17.25 inches from the grid. Assuming the sensor is embedded some distance into the body, I used an estimated field-to-sensor distance of 17.5 inches. This yields the following field-of-view, in degrees: Diagonal: 146 Horizontal: 121 Vertical: 93 Doing a little interval math on the field-to-sensor distance shows these angles are accurate to about plus or minus 1.5 degrees. Int...
Comments